Non-Spring Return Floating Actuator, 44 lb-in

Note: Includes: Mounting bracket, screws, shaft adapter, water-tight strain-relief cable fittings. This non-spring return direct-coupled damper actuator provides modulating and floating/2-position control for: air dampers, air handlers, ventilation flaps, louvers, and reliable control for air damper applications with up to 10 sq. ft./ 44lb.-in. (5 Nm) and 20 sq. ft./88 lb.-in. (10 Nm) (seal-less damper blades; air friction-dependent). SpecificationsDescription: Direct Coupled, General Purpose, Non-Spring Return Actuator Actuator Type: Damper, ValveApplication Type: HVAC Fail Safe Mode: Non-Spring ReturnControl Signal: 2 position, FloatingSupply Voltage: 24 Vac +20%, -15%, 24 VdcNumber of Internal Auxiliary Switch: 0External Auxiliary Switches Available: Yes, SSW2-1MShaft Adapter Type: U-bolt clampManual Operation: Declutch mechanismMounting: Direct CoupledFrequency: 60 Hz, 50 HzRotational Stroke: 95 +/- 3 degreesRotation To Open: By SwitchDual Integral Adj. Stops (3 degree increments)Rotational Stroke Adjustment: Dual Integral Adj. Stops (3 degree increments)Compatible Damper Shafts: 1/4 to 1/2 in. square or 3/8 to 5/8 in. roundPower Consumption: 5 VATemperature Range: -5 F to +140 FEnvironmental Rating: NEMA2 FeaturesDeclutch for manual adjustment Adjustable mechanical end limits Removable access cover for direct wiring Mountable in any orientation Function selection switch for selecting modulating or floating/2-position control