DPDT 30 sec. Delay-on-Make Fixed Time Delay (120V)

The ERDM Series are a combination of digital electronics and a reliable electromechanical relay. These devices offer a DPDT relay output for relay logic circuits, and isolation of input to output voltages. Cost effective for OEM applications, such as random starting, sequencing ON, switch de-bouncing, anti-short cycling, and other common delay-on-make applications. Operation (Delay-on-Make) Upon application of input voltage, the time delay begins. The output is de-energized before and during the time delay. At the end of the time delay, the output energizes and remains energized until input voltage is removed. Reset: Removing input voltage resets the time delay and output. Specifications: Input Voltage (V): 120VAC Input Tolerance (%): -20% - 10% Input AC Line Frequency (Hz): 50/60Hz Output Type: Isolated relay contacts Output Form: DPDT Output Load Rating (VA): 10A resistive @ 120/240VAC and 28VDC; 1/3hp @ 120/240VAC Time Delay Type: Digital integrated circuitry Time Delay Range: 30s fixed Time Delay Tolerance (%): 10% Recycle Time (ms): 150ms Adjustment Type: Fixed Repeat Accuracy (%): 0.5% Setpoint vs Ambient Temperature and Operating Voltage (%): 2% Insulation Resistance: 100 M Isolation Voltage (V): 1500V RMS input to output Polarity: DC units are reverse polarity protected Life: Mechanical - 1 x 107; Full load - 1 x 106 Termination Type: 0.25 in. (6.35mm) male quick connect terminals Mounting Method: Surface mount with two #6 (M3.5 x 0.6) screws Operating Temperature: -40° to 65°C (-40°F to 149°F) Storage Temperature (F/C): -40° to 85°C (-40°F to 185°F) Dimensions: 3.50 x 2.50 x 1.75 in. (88.9 x 63.5 x 44.5 mm)