10" Round Zone Damper, DAMPRND10INC-B

These zone dampers are the latest in design and were developed to fit field requirements for a variety of duct work shapes and sizes. These dampers use 24 VAC direct drive actuators for smooth, quiet performance. There is a 1/2 in. direct-drive mounting hub for securing the damper blade and shaft to the actuator housing. A position indicator and angular rotation stop for viewing or manually setting minimum maximum damper positions facilitate ease of installation. A spring loaded disengagement button to momentarily release main gear and damper blade allows for manual positioning of installed dampers. The damper motor and terminal block wiring are protected by a plastic cover with a removable door. Permanently lubricated bushings, with a split shaft design for round and rectangular style dampers, secure the damper blade to the shaft for efficient reliable service. Specifications: * Damper Type: Zone * Size: 10" * CFM: 490 * Color: Silver * Composition: 1/2" Direct Drive Mounting Hub, Position Indicator, Angular Rotation, Spring Loaded Disengagement Button, Plastic Covered Damper motor, Terminal Block wiring with a Removable Door, Permanently lubricated bushings with a split shaft design * Country of Origin: USA * Cubic Measurement: 0.9259 * Cycle/Hertz: 60 Hz * Dimensional Weight: 27 * Emergency Heat Switch: No * Heat Pump Compatible: No * Mounting: Side * Network Zoning: No * OPT Code: 1PDAMPRND10INC-B * Phase: Single * Power Method: Hardwired * Prop 65: Yes * Shape: Round * UOM: EA * Voltage: 24 VAC * Length: 10 inches (in) * Width: 10 inches (in) * Height: 16 inches (in) * Weight: 8 pounds (lbs)