SPDT 8 Pin Alternating Relay (120V)

The ARP Series is used in systems where equal run time for two motors is desirable. The selector switch allows selection of alternation of either load for continuous operation. LED’s indicate the status of the output relay. This versatile series may be front panel mounted (BZ1 accessory required) or 35 mm DIN rail mounted with an accessory socket. When the rotary switch is in the “alternate” position, alternating operation of Load A and Load B occurs upon the opening of the control switch S1. To terminate alternating operation and cause only the selected load to operate, rotate the switch to position “A” to lock Load A or position “B” to lock Load B. The LEDs indicate the status of the internal relay and which load is selected to operate. Note: Input voltage must be applied at all times for proper alternation. The use of a solid-state control switch for S1 may not initiate alternation correctly. S1 voltage must be from the same supply as the unit’s input voltage (see connection diagrams on datasheet). Loss of input voltage resets the unit; Load A becomes the lead load for the next operation. Specifications: Input Voltage (V): 24 120 or 230VAC Input Tolerance (%): 24VAC: -15% - 20%; 120and230VAC: -20% - 10% Input AC Line Frequency (Hz): 50/60Hz Maximum Output Voltage (V): 250VAC Output Type: Electromechanical Relay Output Form: SPDT DPDT cross wired DPDT Output Load Rating (VA): 10A resistive @ 120/240VAC and 28 VDC; 1/3hp @120 / 240VAC Isolation Voltage (V): 1500V RMS input to output Life: Mechanical - 1 x 107; Electrical - 1 x 106 Termination Type: Octal 8-pin or magnal 11-pin Mounting Method: Plug-in socket Operating Temperature: -20° to 60°C (-4°F to 140°F) Storage Temperature (F/C): -30° to 85°C (-22°F to 185°F) Dimensions: 3.20 x 2.39 x 1.78 in. (81.3 x 60.7 x 45.2mm)