Non-Programmable 1H/1C Thermostat w/ 4.4" Display

Note: Additional Information regarding Product and Installation can be found in Manuals section Product Overview The non-programmable thermostat shall be a Braeburn model number 1030, 4.25” high x 5.12” wide x 1” deep, powered with either 24 Volt AC or with two “AA” Alkaline batteries (3.0 Volt DC). In the event of a power failure, the unit shall retain all user, installer settings and setpoints. The thermostat shall be compatible with low voltage single stage gas, oil, or electric heating or cooling systems, and single stage heat pumps. Also compatible with 250mv – 750mv millivolt heating only systems and 2 wire hydronic zone systems. The thermostat shall have a bright blue backlight display and separate sub-base. Temperature control range shall be between 45° and 90° F (7° and 32° C), accuracy of +/- 1° F (+/- .5° C) and operating humidity range between 5% and 95% relative humidity. The thermostat shall include separate installer and user setup modes, permanent non-volatile memory to retain user settings, filter check monitor and installer lock mode. Features: Non-Programmable Large 4.4 Sq. In. Display Bright Blue Backlight SmartLimit Temperature Limits Hardwire or Battery Powered Installer Lock Mode Filter Check Monitor Optional Celsius Display Separate O and B Terminals Adjustable Temperature Differential Compatible with 2-Wire Hydronic Zone Systems