Structural Adhesive, 2-Part, Duo-Pak Container, 45 mL Container, Methacrylate Base

3M™ Scotch-Weld™ structural plastic adhesive DP8005 is a 2-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene and thermoplastic elastomers (TPEs) without special surface preparation. When using a duo-pak (DP) size adhesive, rely on 3M™ dispensing equipment for convenient and accurate metering, mixing and dispensing. Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt, etc. 3M™ Scotch-Weld™ structural plastic adhesive DP8005 bonds metals, ceramics and wood and most other plastics. We also formulate this adhesive with 8 mil spacer beads for bond line spacing. Our 3M™ Scotch-Weld™ acrylic adhesive DP8005 starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 3 min work life. The adhesive reaches handling strength in approximately 3 hrs and is fully cured in 24 hrs (at 72 °F/22 °C). Acrylic adhesives are 2-part adhesives that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. This very unique adhesive bonds LSE plastics without priming or other surface treatments. Scotch-Weld™ 7100088846, 2-Part, Duo-Pak Container, 45 mL Container, Methacrylate Base, Composition: Part A: Polyester Adipate (NJTS Reg No 04499600-7142), Polyfunctional Aziridine, Amine Borane Complex, Amorphous Silica/Part B: Tetrahydrofurfuryl Methacrylate, 2-Ethylhexyl Methacrylate, Acrylate Polymer (NJTS Reg No 04499600-6806), Butanoic acid, 3-oxo-, 2-(2-methyl-1-oxo-2-propenyl)oxyethyl ester, Glass Spheres, Impact Modifier, Succinic Anhydride, 2-Hydroxyethyl Methacrylate, Carbon Black, Methyl Methacrylate, 3 hr Work Life, 8 to 24 hr Curing, Off-White, 10:1 Mixing Ratio, Part A: 65 g/L, Part B: 392 g/L VOC, For Use On: Plastic, Metal, Ceramic and Wood