Adhesive Sealant, Fast Skinning, Cartridge Container, 12 oz Container

Dynatron™ auto seam sealer grey caulk is a fast skinning, permanently elastic, non-sagging formulation that is brush able and paintable. Our sealer provides excellent adhesion to bare metal or painted surfaces and is a non-staining, all purpose auto body joint and seam sealer. Dynatron™ auto seam sealer grey caulk lay down well on both bare metal and painted surfaces. Our sealer offers high adhesion and has a thick consistency that makes it less likely to drip, sag or run out of the gap being sealed. It dries quickly with little shrinkage. Our sealer creates a water-tight repair that stay in place without cracking. Recommended applications include fresh welds, floor seams, trunk seams, drip rails, voids and gaps. Our seam sealer formula can be brushed or painted on with exceptionally high quality results. When desired, it can be feathered out to a thin layer. The sealer starts to skin in about 10 to 15 min and should be fully hard by the next day. Applying seam sealer can fill gaps and voids that otherwise could lead to water intrusion and eventual corrosion and rust. Seam sealer can also block moisture intrusion that can result in mildew and mold growth in certain areas. 3M™ 7000125070, Fast Skinning, Cartridge Container, 12 oz Container, Composition: Toluene, Limestone, Alpha-Methylstyrene-Vinyltoluene Copolymer, Hydrogenated Synthetic Rubber Polymer, White Mineral Oil (Petroleum), Hydrogenated Hydrocarbon Polymer, Methyl Ethyl Ketone, Titanium Dioxide, Synthetic Amorphous Silica, Fumed, Crystalline Free, Ethylbenzene, 2-Benzotraizoyl-4-Methylphenol, Paste Form, 10 to 20 min Setting, 24 hr Curing, White, 0.86 Specific Gravity, 25 °F Flash Point, 376 g/L VOC, Applicable Materials: Metal